Skip to main content
Crypto Miners Direct

Equipment procurement and project supply

Immersion Mining Farm Equipment

Equipment procurement and project supply for immersion sites: immersion-specification miners with the tanks, dielectric fluid, circulation and heat rejection they run in.
Speak With Mining Sales
An open immersion-cooling tank with miners submerged in liquid
An immersion-cooling cell (BiXBiT) with miners submerged in dielectric liquid. Shown as an example of the equipment class; it is not a product listed here.

Equipment scope

SystemEquipment
Mining hardwareImmersion-specification ASIC miners
Immersion systemTanks, dielectric fluid, fluid handling and filtration
Heat rejectionPumps, plate heat exchangers, dry coolers
PowerTransformers, switchgear, tank-level power distribution
Network & sparesSwitches, PSUs, control boards

What an immersion site consists of

Machines sit submerged in tanks of dielectric fluid. The fluid takes heat directly from every component, circulates through a heat exchanger, and the heat is rejected outdoors by a dry cooler. There are no fans in the machines, so dust and humidity never reach the electronics.

Procurement has four parts that must agree with each other:

  • Miners: models the manufacturer supplies for immersion or marks as immersion compatible. Immersing an air-cooled model means removing its fans and changing firmware, and can affect the manufacturer's warranty; check the terms for the specific model first.
  • Tanks sized for the count and form factor of those miners.
  • Fluid of a type the miner manufacturer permits, in the volume the tanks require, plus a reserve.
  • Heat rejection sized for the full electrical load at peak ambient temperature.

What we supply and what you arrange

We supply the miners and immersion equipment as a procurement scope. System design, installation, fluid filling and commissioning are carried out by your own engineers and contractors.

Most efficient immersion miners listed

Lowest stated J/TH, one per model family.

All immersion miners

Send your project brief

Capacity, voltage and destination are the three facts that let us propose matched equipment in the first reply.

Equipment required
Your details

Include the country code.

City or port, if different from your country.

Order preferences (optional)
Site details (optional, helps us specify the right equipment)

e.g. 415 V three-phase, 480 V, 11 kV supply

We reply by email. Your details are used only to answer this request.

Questions

Can any miner be immersed?

No. Use models the manufacturer sells as immersion units or lists as immersion compatible. Converting an air-cooled miner requires removing fans and changing firmware and may void the manufacturer's warranty.

How much fluid does a site need?

It depends on the tank design and the number of tanks, not directly on the miners. The tank supplier's specification gives the fill volume per tank; add a reserve for top-up and maintenance.