ElphaPex DG2 Series

What the family covers

ElphaPex rates the DG 2 at 17.5 GH/s on 3,850 W at the wall (220 J/GH) and the DG 2+ at 20.5 GH/s on 3,900 W (190 J/GH), with a tolerance of ±3% on hashrate and ±10% on power. Both are air-cooled, measure 432.8 × 196 × 287 mm, the same as the DG 1+, weigh 18.3 kg and run on 200–240 V through two AC input wires rated for 16 A each. ElphaPex names LTC, DOGE and BELLS as the main coins, also lists LKY, PEP, DOGM and EAC, and says both models are built for merge mining.

How the versions differ

The DG 2+ gives about 17% more hashrate than the DG 2 for about 1% more power, so each gigahash takes about 14% less energy. Size, weight and electrical input are the same for both.

Announcement

ElphaPex presented the DG 2 and DG 2+ at its DG Night sales gala in Hong Kong on 27 June 2025, which it describes as the official launch of the new models. In October 2025 it reported that both had been verified to work with NiceHash.

Choosing within the DG2 generation

Models in one generation share a chip platform but differ in cooling type, hashrate and efficiency. Start with the cooling type your site supports, then compare efficiency and power draw between the versions listed above. Use the compare checkboxes to put two to four models side by side.